Breadcrumbs

Turning on the display for the first time

Turning the display on/off

  1. Plug one side of the power cord into the AC power outlet and the other side into the wall socket.

  2. Switch on the Power Switch to turn the i3CONNECT interactive display on.

  3. The display is in standby mode now. Wait a moment until the power indicator lights up. Then press image-20251201-134652.png button on the remote or the button on the display again, to turn the i3CONNECT interactive display on.

  4. Press image-20251201-134652.png button on the remote or the button on the display again, to turn the display in standby mode.

  5. Switch off the Power Switch to cut off the power completely.

Note: The i3CONNECT interactive display needs some time to shut off correctly before it can be switched on again. By interrupting this process, the next start up can take longer.

Note: When there is no active source on the i3CONNECT display, it will go into stand-by mode after 3 minutes.

Connections

Make sure both the external device as well as the i3CONNECT display are turned off when connecting the external device to the display.

Check the plugs at the ends of the cables to make sure that they are the correct type, before plugging them into the jacks of the i3CONNECT interactive display.