Installing the Canvas Frame

Instructions:

1. Unpack the display:

   1. remove the clips from the box by squeezing the central plastic grip.

   2. Lift the top of the box up and off

   3. Pull down the anti-static and scratch protection covers.

2. Mount the display on your choice of mounting system.

3. Unpack the Canvas Frame

4. Take out the long profiles. The profile with cuts in the middle is the bottom profile, and the other is the top profile.

5. Place the top profile on the top of the display.

6. Unpack the screws from the small box inside the main Canvas Frame box.

7. Screw the bottom profile onto the display using the single screw hole in the middle.

8. Insert the CTOUCH tag through the hole in the middle of the shorter profiles.

9. Push the corners into the profile with the tag and then push the right profile into the top and bottom profiles. The corners should click into place.

10. Repeat this step for the left side.

11. Insert the Canvas Frame cable into the matching port on the underside of the display (center).

12. Loosely lay the rubber profile over the display.

13. Slot the tag through the rubber’s only hole.

14. Connect the rubber to the display by sliding the groove on the front side into the frame first, and then push in the back groove. Do this first at the ends of the rubber, making sure that they connect at the bottom in the middle.

15. Then groove the rubber into each corner.

16. Then groove in the rest of the display.

17. Tidy up the cables using the included cable clips.

18. Turn on the display with the power switch on the back and then press the O button on the front.