Mounting frame and Add-On wings for Aspen 4-86
Step 1 - Place the wall bracket of the display.
Step 2 - Mount the vertical uprights of the add-on:
-
Distance from corner bracket to center of slot hole is 464mm
-
Distance from corner bracket to center of slot is 347mm
-
Drill diameter 10mm
Step 3 - First, place the vertical support in the highest position to facilitate hanging the display.
Step 4 - Place the display (see User and Installation Manual for Aspen 4).
Step 5 - Mount the horizontal support at the top with 4 parker screws 4.8x16mm and let the whole rest on the display. First stick high bump-ons on the side that rests on the display.
Step 6 - Mount the lower support after sticking the bump-ons.
Step 7 - Place the wings.
i3CONNECT_ASPEN486_ADDON_TechnicalDrawing.pdf
Mounting frame and Add-On wings for Aspen 4-75
Step 1 - Place the wall bracket of the display.
Step 2 - Mount the vertical uprights of the add-on:
-
Distance from corner bracket to center of slot hole is 223mm
-
Distance from corner bracket to center of slot is 373mm
-
Drill diameter 10mm
Step 3 - First, place the vertical support in the highest position to facilitate hanging the display.
Step 4 - Place the display (see User and Installation Manual for Aspen 4).
Step 5 - Mount the horizontal support at the top with 4 parker screws 4.8x16mm and let the whole rest on the display. First stick high bump-ons on the side that rests on the display.
Step 6 - Mount the lower support after sticking the bump-ons.
Step 7 - Place the wings.
i3CONNECT_ASPEN475_ADDON_TechnicalDrawing.pdf